GYXTC8KH Drop Fiber Optic Cable

GYXTC8KH drop fiber optic cable is to put a number of 250μm colored fibers into a small size low-smoke halogen-free microtube, outer spiral microtube is armored with a stainless steel wire flexible armored protective layer, and spiral tube is in the center of the cable; Also, the self-supporting part is reinforced with corrosion resistant galvanized steel wire, and then extrude low-smoke halogen-free flame retardant material (or PE) into a figure eight structure cable.

Product Model: GYXTC8KH
Fiber Type: G652D, G657A1, G657A2
Fiber Core: 1-24 Core

Application:·
· Self-supporting cable can span within 50m in mountain or hilly areas ；
· It can meet the requirement of pole and line laying with a certain span, and the distance is longer than that of ordinary self-supporting leather cable ；
· Has high cost performance, widely used in FTTH home-entry .

Send email to us Open Whats App

Description

Specification

Package & Shipping

Factory Show

Leave Your Feedback

Cable Structure:

Main Features :

· Accurately controlling the residual length of optical fiber ensures good tensile properties and temperature characteristics of optical cable
· PBT loose tube material has good resistance to hydrolysis, filled with special ointment to protect the optical fiber
· Fiber optic cable is non-metallic structure, light weight, easy laying, anti-electromagnetic, lightning protection effect is better
· Larger number of core than ordinary butterfly-shaped optical cable products, suitable for access to more densely populated villages
· Compared with butterfly-shaped optical cable, runway structure products have stable optical transmission performance with no risk of water accumulation, icing and egg cocoon
· Easy to peel, reduce the time of pulling out the outer sheath, improve the construction efficiency
· It has the advantages of corrosion resistance, UV protection and environmental protection

Product Application:

1. Short-span electric poles are overhead, and high density building wiring and indoor wiring;
2. High lateral pressure resistance in temporary emergency situations;
3. Suitable for indoor, outdoor or indoor environment with high flame retardant grade(such as slot wiring in computer room);
4. The low smoke and low halogen flame retardant sheath has the characteristics of fire prevention and self extinguishing, and is suitable for indoor and outdoor environment such as computer room, complex buildings, complex and convoluted scenes and indoor wiring.

Product Standard:

· YD / T769-2010, GB / T 9771-2008, IEC794 and other standards
· In addition to ordinary PE products, if LSZH products choose different materials, can meet IEC 60332-1 or IEC 60332-3C certification

Optical Characteristics:

		G.652	G.657	50/125μm	62.5/125μm
Attenuation (+20℃)	@850nm	-	-	≤3.5dB/km	≤3.5dB/km
	@1300nm	-	-	≤1.5dB/km	≤1.5dB/km
	@1310nm	≤0.34dB/km	≤0.34dB/km	-	-
	@1550nm	≤0.22dB/km	≤0.22dB/km	-	-
Bandwidth （Class A）	@850	-	-	≥500MHZ·km	≥200MHZ·km
Bandwidth （Class A）	@1300	-	-	≥1000MHZ·km	≥600MHZ·km
Numerical aperture	-	-	-	0.200±0.015NA	0.275±0.015NA
Cable Cutoff Wavelength	-	≤1260nm	≤1260nm	-	-

Cable Parameter:

Fiber Count	Cable Diametermm	Cable Weight Kg/km	Tensile Strength Long/Short Term N	Crush Resistance Long/Short Term N/100m	Bending Radius Static/Dynamic mm
1-12 core	3.5*7.0	59	300/600	300/1000	30D/15D
13-24 core	5.0*9.5	81	300/600	300/1000	30D/15D

Environmental Performance:

Transport temperature	－40℃～＋70℃
Storage temperature	－40℃～＋70℃

Write your message here and send it to us

Optical Characteristics:

		G.652	G.657	50/125μm	62.5/125μm
Attenuation (+20℃)	@850nm	-	-	≤3.5dB/km	≤3.5dB/km
	@1300nm	-	-	≤1.5dB/km	≤1.5dB/km
	@1310nm	≤0.34dB/km	≤0.34dB/km	-	-
	@1550nm	≤0.22dB/km	≤0.22dB/km	-	-
Bandwidth （Class A）	@850	-	-	≥500MHZ·km	≥200MHZ·km
Bandwidth （Class A）	@1300	-	-	≥1000MHZ·km	≥600MHZ·km
Numerical aperture	-	-	-	0.200±0.015NA	0.275±0.015NA
Cable Cutoff Wavelength	-	≤1260nm	≤1260nm	-	-

Cable Parameter:

Fiber Count	Cable Diametermm	Cable Weight Kg/km	Tensile Strength Long/Short Term N	Crush Resistance Long/Short Term N/100m	Bending Radius Static/Dynamic mm
1-12 core	3.5*7.0	59	300/600	300/1000	30D/15D
13-24 core	5.0*9.5	81	300/600	300/1000	30D/15D

Environmental Performance:

Transport temperature	－40℃～＋70℃
Storage temperature	－40℃～＋70℃

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3，000m±2%;

Cable printing:

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Port:
Shanghai/Guangzhou/Shenzhen

Lead Time:

Quantity(KM)	1-300	≥300
Est.Time(Days)	15	To be begotiated!

Package of FTTH Drop Cable
No	Item	Index
No	Item	Outdoor Drop Cable	Indoor Drop Cable	Flat Drop Cable
1	Length and packaging	1000m/Plywood Reel	1000m/Plywood Reel	1000m/Plywood Reel
2	Plywood reel size	250×110×190mm	250×110×190mm	300×110×230mm
3	Carton size	260×260×210mm	260×260×210mm	360×360×240mm
4	Net weight	21 kg/km	8.0 kg/km	20 kg/km
5	Gross weight	23 kg/Box	9.0 kg/Box	21.5 kg/Box

Package & Shipping:

How to choose an economical and practical cable drum packaging to drop cable? Especially in some countries with rainy weather like Ecuador and Venezuela, Professional FOC manufacturers recommend that you use the PVC inner drum to protect the FTTH Drop Cable. This drum is fixed to the reel by 4 screws , Its’ advantage is drums are not afraid of rains & the cable winding is not easy to loosen. The following are the construction pictures fed back by our end customers. After the installation is completed, the reel is still firm and intact.

https://www.gl-fiber.com/products-ftth-drop-cable/

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach 1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.