In recent years, with the support of national policies for the broadband industry, the ADSS fiber optic cable industry has developed rapidly, which has been accompanied by numerous problems.
The following are the briefly describes of five testing method based on the resistance of the fault point:...
GL Technology as a professional fiber cable manufacturer in China for more than 17years, we have the complete on-site testing capabilities for Optical Ground Wire (OPGW) cable.and we can supply our customers OPGW cable industrial testing documents,such as IEEE 1138, IEEE 1222 and IEC 60794-1-2.
W...
As we all know, There are several parts that made up the fiber cable. Each part starting from the cladding, then the coating, strength member and lastly the outer jacket is covered at the top of each other to give protection and shielding especially the conductors and the fiber core. Above all of...
With social distancing seeing a rise in digital activity, many are looking towards faster, more efficient internet solutions. This is where 5G and fibre optic are coming to the fore, but there is still confusion about what each of them will provide users. Here’s a look at What are the differences...
High investment cost and low optical fiber utilization rate are the main problems of cable layout; air blowing cabling provides the solution. That technology of air-blown cabling is to lay optical fiber in the plastic duct by air blown. It reduces the laying cost of the optical cable and hoisting...
When searching the Internet for network fiber patch cables, We should condider 2 main factors: the transmission distance and the project budget allowance. So dow do I know which fiber optic cable I need?
What is single mode fiber cable?
Single mode(SM) fiber cable are the best choice for transmi...
ACSR is a high-capacity stranded conductor which is mainly used for overhead power lines. The ACSR conductor design can be done like this, the outside of this conductor can be made with pure aluminum material whereas the inside of the conductor is made with a steel material so that it giv...
We all know that Fiber-optic cable also named optical-fiber cable. It is a network cable that contains strands of glass fibers inside an insulated casing. They're designed for long-distance, high-performance data networking, and telecommunications.
Based on Fiber Cable Mode, we think fiber optic ...
This year 2020 will be ending in 24 hours and it will be a fully new year 2021.
Thank you for all your support in the past year!
Sincerely hope in the year 2021 we can have further cooperation with you in Fiber Optic Cable area.
Happy new year to everyone!
&nbs...
Air blown fiber is designed to be placed in the micro duct, typically with an inner diameter of 2~3.5mm. Air is used to propel fibers from one point to another point and reduce the friction between the cable jacket and the inner surface of micro duct when deploying. Air blown fibers are manufactu...
In current years, while the advanced information society has been expanding rapidly, the infrastructure for telecommunication has been building expeditiously with various methods such as direct burial and blowing.
Air-blown Optical Fiber Cable is small size, light weight, enhanced surface outer ...
Some Representative Fiber OPtic Cable Projects GL Has Joined For Customer Kind Reference:
Country Name
Project Name
Quantity
Project Discription
Nigeria
Lokoja-Okeagbe 132kV Transmission Lines
200KM
The overhead ground wires shall have the characteristics as stated in Schedule...
As a leading professional manufacturer of fiber optic cables, GL Technology provides excellent-quality cables for global customers.
OPGW Cable also called optical fiber composite overhead ground wire, it is a type of cable that is used in overhead power lines. Stranded stainlesss steel tube OPG...
All-Dielectric Self-Supporting(ADSS) fiber optic cable is a non-metallic cable which supports its own weight without the use of lashing wires or messenger,The non-metallic optical cable which can be hung directly on the power tower is mainly used for the communication route of overhead high volta...
GL as a leading fiber optic cable manufacturer In China, We cherish the quality as our life, that professional purchasing team is stationed in the production frontline for QA and prompt delivery.Each cable will be quality re-assured and repeat re-pored before shipping. Each cable’s manufacturing ...
OPGW is a dual functioning cable performing the duties of a ground wire and also providing a patch for the transmission of voice, video or data signals . The fibers are protected from environmental conditions (lightning, short circuit, loading) to ensure reliability and longevity. The cable is de...
We all know that there are some limiting factors affests lifespan of fiber optic cable, Such as the long term stress on the fiber and the largest flaw on the fiber surface, etc.
After professionally designed and engineered structure design, Barring cable damage and water ingress, the design life ...
Fiber Optic Cable also known as optical fiber cable, is an assembly similar to an electrical cable. But it contains one or more optical fibers that are used to carry light. Composed of connector and optical fiber, fiber optic cables provide better transmission performance than copper cables and i...
Let's Continue to our yesterday's discussion on ACSR conductor. As below is the ACSR Conductor Technical Structure.
We all know some severial basic types of ACSR, Such as squirrel conductor used for LT line, Rabbit conductor used for HT line, 66kv: Coyote conductor used for Transmission,So How d...
Aluminium Conductors Steel Reinforced (ACSR), also known as Bare aluminium conductors, are one of the most widely used conductors for transmission. The conductor consists of one or more layers of aluminium wires stranded over a high strength steel core that can be single or multiple strands depen...