The implementation of the direct-buried optical cable project should be carried out according to the engineering design commission or the communication network planning plan. The construction mainly includes the route digging and filling of the optical cable trench, the plan design, and the setti...
The air blown cable greatly improves the utilization efficiency of the tube hole, so it has more market applications in the world. The micro-cable and micro-tube technology (JETnet) is the same as the traditional air-blown fiber optic cable technology in terms of laying principle, that is, "mothe...
Today, GL talks about how to improve the common measures of OPGW cable thermal stability:
1. Shunt line method
The price of OPGW cable is very high, and it is not economical to simply increase the cross-section to bear the short-circuit current. It is commonly used to set up a lightning protectio...
Adding ADSS cables to the 110kV line that has been in operation, the main problem is that in the original design of the tower, there is no consideration at all to allow the addition of any objects outside the design, and it will not leave enough space for the ADSS cable. The so-called space not o...
China top 3 air-blown micro fiber optic cable supplier, GL has more than 17 years experience, Today, we will introduce a specal fiber optic cable SFU (Smooth Fibre Unit ).
The Smooth Fibre Unit (SFU) consists of a bundle of low bend radius, no waterpeak G.657.A1 fibres, encapsuled by a dry acryla...
OPGW is more and more widely used, but its service life is also a concern of everyone. If you want a long service life of optical cables, you should pay attention to the following three technical points:
1. Loose Tube Size
The influence of the size of the loose tube on the lifetime of the OPGW ca...
As we all know that OPGW optical cable is built on the ground wire support of the power collection line tower. It is a composite optical fiber overhead ground wire that puts the optical fiber in the overhead ground wire to serve as a combination of lightning protection and communication functions...
Communication optical fiber cables are more commonly used in overhead, direct buried, pipelines, underwater, indoor and other adaptive laying optical cables. The laying conditions of each optical cable also determine the difference between the laying methods. GL probably summarized a few points:
...
OPGW optical cable is mainly used on 500KV, 220KV, 110KV voltage level lines. Affected by factors such as line power outages, safety, etc., it is mostly used in newly-built lines. Overhead ground wire composite optical cable (OPGW) should be reliably grounded at the entry portal to prevent the op...
Project Name: Chile [500kV overhead ground wire project]
Brief Project introduction:
1Mejillones to Cardones 500kV Overhead Ground Wire Project,
10KM ACSR 477 MCM and 45KM OPGW and OPGW Hardware Accessories
Site: Northern Chile
Promoting the connection of power grids in central and northern Chi...
Which optical fiber is used for transmission network construction?
There are three main types: G.652 conventional single-mode fiber, G.653 dispersion-shifted single-mode fiber and G.655 non-zero dispersion-shifted fiber.
G.652 single-mode fiber has a large dispersion in the C-band 1530~1565nm a...
Many customers ignore the voltage level parameter when purchasing ADSS optical cables. When ADSS optical cables were just put into use, my country was still in an undeveloped stage for the ultra-high voltage and ultra-high voltage fields, and the voltage levels commonly used in conventional power...
With the development of information transmission technology, Long-distance backbone networks and user networks based on OPGW optical cables are taking shape. Due to the special structure of OPGW optical cable, it is difficult to repair after damage, so in the process of loading, unloading, transp...
As we all know that signal attenuation is inevitable during cable wiring, The reasons for this are internal and external: the internal attenuation is related to the optical fiber material, and the external attenuation is related to the construction and installation. Therefore, it should be noted ...
In recent years, with the support of national policies for the broadband industry, the ADSS fiber optic cable industry has developed rapidly, which has been accompanied by numerous problems.
The following are the briefly describes of five testing method based on the resistance of the fault point:...
GL Technology as a professional fiber cable manufacturer in China for more than 17years, we have the complete on-site testing capabilities for Optical Ground Wire (OPGW) cable.and we can supply our customers OPGW cable industrial testing documents,such as IEEE 1138, IEEE 1222 and IEC 60794-1-2.
W...
Some Representative Fiber OPtic Cable Projects GL Has Joined For Customer Kind Reference:
Country Name
Project Name
Quantity
Project Discription
Nigeria
Lokoja-Okeagbe 132kV Transmission Lines
200KM
The overhead ground wires shall have the characteristics as stated in Schedule...
GL as a leading fiber optic cable manufacturer In China, We cherish the quality as our life, that professional purchasing team is stationed in the production frontline for QA and prompt delivery.Each cable will be quality re-assured and repeat re-pored before shipping. Each cable’s manufacturing ...