24 thapo ea mantlha ea ADSSe sebelisoa haholo boenjiniere ba matla, bo ka bonts'ang ka kotloloho ho tloha tlhokeho ea bareki ho ea ho potso ea bareki. Ehlile, ho na le litlhaloso tse ngata tsa 24-core ADSS cables. Ha re shebeng ka bokhutšoanyane thapo ea optical ea ADSS-24B1-PE-200. Lintlha tse latelang ke lintlha tse khethehileng tsa parameter:
Moralo oa Karolo ea Lithapo:
Tlhaloso ea Fiber ea Optical:
| (Ntho) | Yuniti | Tlhaloso | |
| G. 652D | |||
| Mode bophara ba tšimo | 1310nm | mm | 9.2 ± 0.4 |
| 1550nm | mm | 10.4 ± 0.8 | |
| Bophara ba ho roala | mm | 125.0 ±1 | |
| Ho koahela ho se pota-potile | % | £1.0 | |
| Phoso ea mantlha ea concentricity | mm | £0.5 | |
| Bophara ba ho roala | mm | 245 ± 7 | |
| Phoso ea ho koaheloa / ho koaheloa | mm | £12 | |
| Bolelele ba maqhubu a khaotsoeng ka thapo | nm | £ 1260 | |
| Attenuation Coefficient | 1310nm | dB/km | £0.4 |
| 1550nm | dB/km | £0.3 | |
| Boemo ba khatello ea maikutlo | kpsi | ≥100 | |
ITU-T G.652 (Mekhabiso e meng e kopana le maemo a tloaelehileng a ITU-T G.652)
Li-parameter tsa Cable Technical:
| Palo ea fiber | Sebopeho | Li-fibers ka tube | Bophara ba tube bo hlephileng（mm） | CSM bophara / pad bophara（mm） | Botenya ba baki ea ka ntle（mm） | Bophara ba cable（mm） | Boima ba thapo（kg/km） |
| 24 | 1+5 | 12 | 2.2±0.1 | 1.8/1.8 | 1.5±0.1 | 10.0±0.5 | 73 |
Ts'ebetso ea Cable:
| Ntho） | (Mekhahlelo) | |||
| Tube e hlephileng | Lintho tse bonahalang | PBT | ||
| Mmala | Mebala eohle e bonts'a | |||
| Tlatsi | Lintho tse bonahalang | PE | ||
| Mmala | Ntsho | |||
| CSM | Lintho tse bonahalang | FRP | ||
| E se nang tšepe e matlafalitsoenglikotoana | Lintho tse bonahalang | Khoele ea Aramid | ||
| Baki ea ka ntle | Lintho tse bonahalang | HDPE | ||
| Mmala | Ntsho | |||
| Min. radius e kobehang | E tsitsitseng | 10 makhetlo a cable bophara | ||
| Matla | 20 makhetlo a cable bophara | |||
| Ho kobeha ka ho pheta-pheta | Laela:150N;palo ealipotoloho:30 Ha ho na tlhokomelo e hlakileng ea tlatsetso, ha ho khefu ea fiber ebile ha ho na tšenyo ea cable. | |||
| Ts'ebetso e tsitsitseng | RTS | MAT | EDS | |
| 3500N | 1500N | 800N | ||
| MAT:The atlatsetsotlhokomelo≤0.1dB,khatello ea fiber≤0.4% | ||||
| Qhatla | Nako e khutšoane | 2200N/100mmThe atlatsetsotlhokomelo≤0.1dB | ||
| Torsion | Laela:150N; palo ea lipotoloho: 10; twist angle:±180°Ha ho na tlhokomelo e hlakileng ea tlatsetso, ha ho khefu ea fiber ebile ha ho na tšenyo ea cable. | |||
| Tšusumetso | Imatla a matla:450g×1m; radius ea hlooho ea hamore: 12.5mm; palo ea tšusumetso: 5 Ha ho na tlhokomelo e hlakileng ea tlatsetso, ha ho na khefu ea fiber le tšenyo ea cable. | |||
Tikoloho:
| (Ntho) | (E tloaelehileng) | (Liparamente) |
| Mocheso oa ts'ebetso | IEC 60794-1-2 F1 | -40℃～+70℃ |
| Ho kenella ka metsi | IEC 60794-1-2-F5 | Boemo ba metsi:1m, mohlala:3m, Kamora 24h,ha ho na metsi a kenang. |