I-GL FIBBER ibonelela nge-HDPE-sheathedI-All-Dielectric Self-Supporting (ADSS) iintambo zefiber optickunye nokuqiniswa kwentambo ye-aramid, ekhoyo kuqwalaselo lwe-12, 24, 48, kunye ne-96 cores. Ezi ntambo zenzelwe ukufakelwa kwe-air, ukuphelisa imfuno yezakhiwo ezongezelelweyo zenkxaso.
Ezona mpawu:
☆ Ulwakhiwo olungelulo lweMetal: luqinisekisa ukugquma okugqwesileyo kunye nokhuseleko kumbane.
☆ Ilungu le-Aramid Larn Strength: Ibonelela ngamandla okuqina aphezulu, ivumela intambo ukuba izixhase kwisithuba eside.
☆ Ijacket yangaphandle ye-HDPE: Ibonelela ngokumelana nezinto ezisingqongileyo ezinje ngemitha ye-UV kunye nokufuma.
☆ Uyilo lweThubhu eLawulayo: Ityhubhu nganye izaliswe ngejeli ukuthintela ukungena kwamanzi, ukomeleza ukuqina.
IiNgcaciso zobuGcisa:
1. Iintlobo zeFayibha: I-Single-mode ye-G652D, i-G657A1, i-G657A2.
2. Iinketho zokubala zeFiber: 2 ukuya kwi-144 fibers.
3. Izinto zeJacket: I-Polyethylene (PE) okanye i-Anti-Tracking (AT) yeendawo eziphezulu ze-voltage.
4. Uluhlu lobushushu obusebenzayo: -40 °C ukuya +70 °C.
5. Ukuthotyelwa: Idibana ne-IEEE 1222-2004 kunye nemigangatho ye-IEC 60794-1.
Iingcaciso zeCable ye-ADSS:
1.ADSS ibhatyi enye
| inani lefiber | isakhiwo | ifayibha ityhubhu nganye | ilahleko ityhubhu idayamitha(MM) | FRP/pad idayamitha (mm) | Ukutyeba kwebhatyi yangaphandle(mm) | Ref. Ngaphandle Ububanzi (mm) | Ref. Ubunzima (kg/km) | |
| Ibhatyi yePE | Ngebhatyi | |||||||
| 4 | 1+5 | 4 | 1.9 | 2.0/2.0 | 1.7±0.1 | 9.8 | 80 | 90 |
| 6 | 1+5 | 6 | 1.9 | 2.0/2.0 | 1.7±0.1 | 9.8 | 80 | 90 |
| 8 | 1+5 | 4 | 1.9 | 2.0/2.0 | 1.7±0.1 | 9.8 | 80 | 90 |
| 12 | 1+5 | 6 | 1.9 | 2.0/2.0 | 1.7±0.1 | 9.8 | 80 | 90 |
| 24 | 1+5 | 6 | 2.0 | 2.0/2.0 | 1.7±0.1 | 9.8 | 85 | 95 |
| 48 | 1+5 | 12 | 2.0 | 2.0/2.0 | 1.7±0.1 | 10.0 | 88 | 98 |
| 72 | 1+6 | 12 | 2.2 | 2.0/2.0 | 1.7±0.1 | 10.5 | 98 | 108 |
| 96 | 1+8 | 12 | 2.2 | 2.0/3.4 | 1.7±0.1 | 12.0 | 122 | 135 |
| 144 | 1+12 | 12 | 2.2 | 3.0/7.2 | 1.7±0.1 | 15.2 | 176 | 189 |
2. ADSS ibhatyi kabini
| inani lefiber | isakhiwo | ifayibha ityhubhu nganye | ilahleko ityhubhu idayamitha(MM) | FRP/pad idayamitha (mm) | Ukutyeba kwebhatyi yangaphandle(mm) | Ref. Ngaphandle Ububanzi (mm) | Ref. Ubunzima (kg/km) | |
| Ibhatyi yePE | Ngebhatyi | |||||||
| 4 | 1+5 | 4 | 1.9 | 2.0/2.0 | 1.7±0.1 | 12.0 | 125 | 135 |
| 6 | 1+5 | 6 | 1.9 | 2.0/2.0 | 1.7±0.1 | 12.0 | 125 | 135 |
| 8 | 1+5 | 4 | 1.9 | 2.0/2.0 | 1.7±0.1 | 12.0 | 125 | 135 |
| 12 | 1+5 | 6 | 1.9 | 2.0/2.0 | 1.7±0.1 | 12.0 | 125 | 135 |
| 24 | 1+5 | 6 | 2.0 | 2.0/2.0 | 1.7±0.1 | 12.0 | 128 | 138 |
| 48 | 1+5 | 12 | 2.0 | 2.0/2.0 | 1.7±0.1 | 12.5 | 130 | 140 |
| 72 | 1+6 | 12 | 2.2 | 2.0/2.0 | 1.7±0.1 | 13.2 | 145 | 155 |
| 96 | 1+8 | 12 | 2.2 | 2.0/3.4 | 1.7±0.1 | 14.5 | 185 | 195 |
| 144 | 1+12 | 12 | 2.2 | 3.0/7.2 | 1.7±0.1 | 16.5 | 212 | 228 |
Iingcebiso: zonke iinkcukacha ezikule theyibhile ingentla yidatha eqikelelweyo, kwiinkcukacha ezithe vetshe, pls qhagamshelana nabathengisi bethu.
Ezi ntambo zifanelekile ukuzimela kofakelo lwe-aerial kwiindawo zombini zokusabalalisa kunye nokuhanjiswa, ukunika isisombululo esithembekileyo kuthungelwano olude lonxibelelwano. Ukusetyenziswa kwentambo ye-aramid evela kumazwe angaphandle iqinisekisa ukuhanjiswa okufanayo koxinzelelo kunye nokusebenza okugqwesileyo koxinzelelo.
Ngolwazi oluthe kratya oluthe vetshe, kubandakanywa iiparamitha zobugcisa ezithile kunye nokhetho lokwenza ngokwezifiso, nceda undwendwele iphepha lemveliso elisemthethweni le-GL FIBER: https://www.gl-fiber.com/products-adss-cable.